Oust bearings are made in USA of the finest materials - and are the preferred bearing choice for our Sk8Kings team. We highly recommend using Oust Bearings with our Turbo wheel
line with steel spacers for the smoothest, fastest ride possible.
Available in two versions - Moc 5 Street (blue case) and Moc 5 Tech (red case)
Bearing Care and Spacers - Discount prices when you add on to this purchase
Here is some technical information supplied by OUST:
Oust MOC 5 Street Blue - Street skateboarding is a combination of asphalt, steel and concrete interrupted by moments of fright, terror, and indecision. A special bearing had to be developed to accommodate a wide range of ages and styles of skating. One that would hold together in any condition, without giving up speed or load capabilities of the MOC 5 Tech. The metal shields replaced the buna seals to reduce the possibility of damage to the buna seal during assembly . A small oil hole ( Pat.Pend ) in each shield was put in so the bearing could be cleaned and oiled. Tolerances were changed to accommodate the new environment and the Oust MOC 5 Street was complete. It's the fastest and toughest bearing in the industry for street.
Oust MOC 5 Tech Red - The Oust MOC 5 Tech Bearing was designed for endurance in technical skateboarding. Some of the roughest conditions in skateboarding are reached during the ollie's, blunts, grinds, and tricks of technical skating. To maximize the strength of the MOC 5 Tech bearing a high strength carbon steel ball cage was used. This cage would ensure ball placement in the harshest environments and extend bearing life for thousands of skating hours. The MOC 5 Tech bearing is manufactured with the same high precision specification as the MOC 7 Speed.
Lube Recommendation - All OUST Bearings come lubricated from the factory with MET-OL Synthetic speed oil. All MOC Series bearings should be lubricated every 6 hours of use with MET-OL Synthetic speed oil. When skating slalom, down hill racing or distance racing the bearings should be lubed every 2 hours of racing.
The Only Bearing Engineered Specifically for Skateboards - After several years of research Oust, Inc. has developed a hybrid skateboard bearing named the MOC SERIES. These bearings meet all the critical factors for aggressive skateboarding. Unlike the common 608 bearings that are presently being used in the skateboarding industry which only require a radial load roll-out, OUST Inc. has designed a hybrid bearing which meet all the criteria for Static, Dynamic and Impact loads as well as bearing misalignment caused by torque. These are side loads associated with carving, powerslides, pumping and technical skating. The OUST MOC Series bearings are the FIRST and only bearing manufactured for skateboarding that achieve a matched coefficient of friction between radial load roll-out and tortional load roll out. There are four bearings designed for specific skateboarding, the 5 Street, MOC 5 Tech, MOC 7 Speed, and the MOC 9 Airr.... All four have the same structural design but there are changes in the cage, seal, ball grade and finish. The MOC 9 Airr... has also been strengthened and reduced in weight. Specifically designed for maximum performance in Technical, Street, Vert and Slalom! (Courtesy Oust)
